
Final Assessment: Answers and Feedback
Where you are: Module 14 — Case Studies and Final Assessment · Final Assessment: Answers and Feedback · Covers Modules 1–14 of Dr. Tahseen Al Doori's Troubleshooting Essentials.
How to use this feedback
Open this lesson only after you have answered all 25 questions in Final Assessment: 25 Questions and recorded your choices. For each question you will find the correct answer, why it is right, why each of the other options is wrong, and the module and book section to revisit.
Read the explanations for the questions you answered correctly as well: a right answer reached for the wrong reason is worth correcting now.
Pass guidance: 70% or more, which is 18 out of 25, suggests you are ready to apply the method independently. Below that, use the revision table at the end of this lesson.
Answer key at a glance
| Q | Answer | Module | Q | Answer | Module |
|---|---|---|---|---|---|
| 1 | c | 1 | 14 | c | 8 |
| 2 | b | 2 | 15 | d | 8 |
| 3 | d | 2 | 16 | b | 9 |
| 4 | a | 3 | 17 | a | 9 |
| 5 | d | 3 | 18 | d | 10 |
| 6 | c | 4 | 19 | c | 10 |
| 7 | b | 4 | 20 | a | 11 |
| 8 | d | 5 | 21 | b | 12 |
| 9 | a | 5 | 22 | c | 12 |
| 10 | b | 6 | 23 | d | 13 |
| 11 | c | 6 | 24 | a | 13 |
| 12 | b | 7 | 25 | c | 14 |
| 13 | a | 7 |
Answers explained
Question 1 — Module 1 (book §1.1)
A college IT team spends the first Saturday of every month installing tested updates, cleaning dust from lab computers and checking that backups completed. Which activity does this describe?
Correct answer: c) Maintenance
Why it is right: Maintenance is planned work that keeps a system healthy before it fails, which is exactly what scheduled updates, cleaning and backup checks are.
Why the other options are wrong:
- a) Troubleshooting — Troubleshooting is the investigation of an unexpected fault that has already happened; nothing has failed here.
- b) Repair — Repair corrects a known fault; no fault has been identified.
- d) Escalation — Escalation passes a problem to someone with more skill, access or authority; nothing is being handed on.
Question 2 — Module 2 (book §2.2)
Faced with a desktop that cannot reach the internet, a technician changes the DNS server, updates the network driver and replaces the patch cable, then tests once. The internet works again. What is the main problem with this approach?
Correct answer: b) Three changes were made at once, so it is impossible to know which one fixed the fault
Why it is right: The principle 'change one thing at a time' exists because cause and effect are lost when several changes are made together. The fix cannot be documented reliably and the two unnecessary changes may cause new faults.
Why the other options are wrong:
- a) The technician should have restarted the computer before testing — A restart is a sensible quick win, but it does not address the loss of cause and effect.
- c) Network drivers should never be updated during troubleshooting — Updating a driver can be a valid, planned change; the problem is doing it alongside other changes.
- d) The technician should have escalated before making any change — Nothing in the scenario requires escalation (no safety, data, security or authority issue).
Question 3 — Module 2 (book §2.5)
A user opens a ticket saying: 'It is the new update, updates always break my printer.' The technician spends an hour rolling back the update without checking anything else, and the printer still fails. Which thinking trap caught the technician first?
Correct answer: d) Anchoring
Why it is right: Anchoring is fixing on the first piece of information received, such as the user's own diagnosis. The technician accepted the user's theory as the starting fact instead of treating it as one theory to test.
Why the other options are wrong:
- a) Sunk-cost thinking — Sunk-cost thinking is continuing because time has been invested; the trap here began before any time was spent.
- b) Availability bias — Availability bias is assuming the cause of the last similar problem the technician met; the idea came from the user, not from the technician's recent experience.
- c) Confirmation bias — Confirmation bias is noticing only supporting evidence; the scenario shows the technician taking the first information as given rather than filtering evidence.
Question 4 — Module 3 (book §3.3)
In Step 3 a technician tests the theory that a loose cable is causing a fault. The cable is firmly seated and a known-good cable makes no difference. What should the technician do next?
Correct answer: a) Return to Step 2 and test the next most likely cause, escalating if all theories are exhausted
Why it is right: Steps 2 and 3 form a loop: a rejected theory sends you back to Step 2 for the next most likely cause, until a cause is confirmed or the problem is escalated.
Why the other options are wrong:
- b) Move on to Step 4 and plan the fix for the cable anyway — No fix is planned until a cause is confirmed; this theory has just been rejected.
- c) Replace the computer, since the simplest cause has been ruled out — Replacing the computer is a jump to an expensive fix with no confirmed cause.
- d) Close the ticket as 'could not reproduce' — The fault is still present; closing the ticket abandons the user.
Question 5 — Module 3 (book §3.6, §13.4)
A technician updates a user's saved email password, sends one test message from their own admin console, sees it arrive and closes the ticket. According to Step 6, what is missing?
Correct answer: d) Repeating the failed action on the user's system, checking related functions and asking the user to confirm
Why it is right: Step 6, verify full system functionality, means repeating the action that originally failed, checking that nothing else broke and asking the user to confirm the system works for them before closing.
Why the other options are wrong:
- a) A rollback plan — A rollback plan belongs to Step 4, before implementation.
- b) A ranked list of probable causes — A ranked list of causes is the output of Step 2.
- c) An escalation to Tier 2 — Nothing suggests the fault is beyond the technician's skill or authority.
Question 6 — Module 4 (book §4.1)
While investigating blank pages from a printer, you learn that the toner cartridge was replaced on Monday, just before the fault began. Which of the 5W1H questions does this fact answer most directly?
Correct answer: c) Which
Why it is right: In the author's 5W1H, Which asks which changes happened just before the fault. The cartridge replacement is a change; the book's own example gives exactly this answer under Which.
Why the other options are wrong:
- a) What — What describes the symptom (blank pages instead of invoices).
- b) Who — Who describes the people affected.
- d) How — How describes how the fault is triggered and whether it can be repeated.
Question 7 — Module 4 (book §4.6)
Which of these is the best problem statement?
Correct answer: b) Since 09:00 today, all three finance staff cannot print invoices to the second-floor printer. It happens every time they print. The most recent change was a driver update last night. The error shown is 'Printer offline'.
Why it is right: A good problem statement is specific, factual and testable. Option b follows the template: when, who, what, where, always or intermittent, the most recent change and the exact error.
Why the other options are wrong:
- a) The finance printer is broken again and needs replacing. — It contains a conclusion (needs replacing) and no testable facts.
- c) Users are unhappy with printing, possibly because of the network or the driver. — It mixes feelings with untested theories and gives no when, where or error.
- d) Printing has been slow on and off for a while and should be looked at. — It is vague about time, scope, symptom and change.
Question 8 — Module 5 (book §5.1–5.5)
A colleague's desktop appears dead. In which order should the five quick-win checks be performed?
Correct answer: d) Power, connections, restart, settings and input, updates and resources
Why it is right: The book's order is power, connections, restart, settings and input, then updates, storage and resources. Each check is quicker and more basic than the one after it.
Why the other options are wrong:
- a) Restart, power, connections, updates and resources, settings and input — Restarting first is pointless if the device has no power.
- b) Settings and input, power, restart, connections, updates and resources — Settings cannot be checked on a device that is not powered or connected.
- c) Connections, power, settings and input, restart, updates and resources — Connections come after power in the author's order.
Question 9 — Module 5 (book §5.6)
A receptionist has restarted her computer every morning for three weeks because it freezes by mid-morning. Each restart works for a few hours. How should this be treated?
Correct answer: a) As a workaround: investigate the underlying cause, such as a memory leak, a failing driver or overheating
Why it is right: If a quick win has to be repeated it is a workaround, not a fix. A restart treats the symptom; the book directs the troubleshooter to find the underlying cause.
Why the other options are wrong:
- b) As a fix: the restart solves the problem, so the ticket can be closed — A fault that returns daily has not been fixed.
- c) As user error: the receptionist should stop using the computer for so long — Blaming the user avoids the investigation; nothing indicates misuse.
- d) As a hardware failure: replace the computer immediately — Replacement is a jump to a costly fix without a confirmed cause.
Question 10 — Module 6 (book §6.1)
A signal passes through a chain of 16 components and fails somewhere along it. Using the half-split method, what is the maximum number of tests needed to find the faulty component?
Correct answer: b) 4
Why it is right: Each half-split test removes half of the remaining possibilities: 16, then 8, then 4, then 2, then 1. That is four tests (2 to the power of 4 is 16).
Why the other options are wrong:
- a) 2 — Two tests can only narrow 16 components down to 4.
- c) 8 — Eight tests would be needed only if each test removed two components.
- d) 16 — Sixteen tests is testing every component in turn, which is what half-split avoids.
Question 11 — Module 6 (book §6.5)
A browser crashes several times an hour. It has 12 extensions. With all extensions disabled it runs all day without a crash. The technician re-enables them one at a time, testing after each, and the crashes return straight after the seventh is enabled. Which technique is this, and what is the conclusion?
Correct answer: c) Remove and restore; the seventh extension is the most likely cause
Why it is right: Reducing the system to a minimum and restoring items one at a time until the fault returns is remove and restore. The last item restored is the cause.
Why the other options are wrong:
- a) Comparison; the browser differs from a colleague's — No working system was set beside the faulty one.
- b) Half-split; the fault lies in the second half of the list — Half-split would test half the extensions at once, not one at a time.
- d) Rollback; the most recent browser update caused the crash — No change was undone; items were added back one by one.
Question 12 — Module 7 (book §7.3, §9.3)
A wired desktop cannot reach anything on the network. ipconfig shows IPv4 address 169.254.33.17, subnet mask 255.255.0.0 and no default gateway. What does this most likely mean?
Correct answer: b) The computer received no response from a DHCP server
Why it is right: An address beginning 169.254 means the computer asked for an address and no DHCP server answered, so it assigned itself one. Check the cable, the router or DHCP server, then release and renew.
Why the other options are wrong:
- a) The DNS server is not responding — A DNS fault would leave a valid address and gateway in place; only name resolution would fail.
- c) The computer has a valid address and the fault is at the internet provider — 169.254 is not a valid address from the local network, so the fault is local, not at the provider.
- d) The TCP/IP stack on the computer is not installed — The stack is working well enough to self-assign an address; ping 127.0.0.1 would test it.
Question 13 — Module 7 (book §7.3, §9.4)
Running the connectivity sequence, a user finds that ping 127.0.0.1 succeeds, ipconfig shows a valid address and gateway, the gateway and 8.8.8.8 both reply, but ping www.example.com reports that it could not find the host. Where is the fault?
Correct answer: a) Name resolution (DNS)
Why it is right: Each step tests one more part of the path, and the first failure shows the fault. Everything up to the internet by IP address works; only the name fails, so the fault is in DNS.
Why the other options are wrong:
- b) The local TCP/IP stack — ping 127.0.0.1 succeeded, so the local stack works.
- c) The cable between the computer and the switch — A cable fault would stop the gateway and 8.8.8.8 replies too.
- d) The default gateway — The gateway replied, and traffic reached 8.8.8.8 through it.
Question 14 — Module 8 (book §8.5, §13.1)
A laptop's hard disk has started making clicking noises, files take a long time to open and Event Viewer shows disk errors. The user's only copy of their dissertation is on it. What should be done first?
Correct answer: c) Back up the important data immediately and stop unnecessary use of the drive
Why it is right: These are warning signs of failing storage. The book's rule is back up first and troubleshoot second: every further operation on a failing drive can make recovery harder. Data at risk is also a reason to escalate if you cannot copy it safely.
Why the other options are wrong:
- a) Run a full disk check with repair so that the errors are fixed before copying anything — A repair scan works the failing drive hard and may make recovery harder; never run repairs on the only copy of important data.
- b) Defragment the disk to speed up file access — Defragmenting causes heavy disk activity on a failing drive.
- d) Reinstall the operating system to clear the errors — Reinstalling overwrites data and does nothing for failing hardware.
Question 15 — Module 8 (book §8.2)
After a technician fitted a new drive in a desktop, it powers on, the fans run and the manufacturer logo appears, followed by the message 'No boot device found'. What is the most sensible first action?
Correct answer: d) Check the firmware (BIOS/UEFI) settings for the drive and boot order, and check the drive connection
Why it is right: No boot device found means the storage is not detected or the boot order is wrong. The book's action is to check the firmware settings and the drive connection, which fits a computer whose drive has just been changed.
Why the other options are wrong:
- a) Replace the power supply — The computer powers on, so the power supply is working.
- b) Test with an external monitor and reseat the memory — These actions suit no display with fans running; here the display works.
- c) Run Windows Memory Diagnostic — Memory faults cause crashes and error screens; the message points to storage or boot order.
Question 16 — Module 9 (book §9.1, §9.3)
In a small office, every computer has a valid address and can ping the default gateway 192.168.10.1, but ping 8.8.8.8 times out from all of them. Which conclusion and next step fit best?
Correct answer: b) The fault is in the router, modem or provider; power-cycle the modem and router in order and check the provider's status
Why it is right: Every device is affected and the gateway is reachable, so the local network works and the fault lies beyond it: router, modem or internet provider. The book's action is to power-cycle the modem and router and check provider status.
Why the other options are wrong:
- a) Each computer has a faulty network cable; replace all the cables — Faulty cables would stop the gateway replies; the local link is working on every machine.
- c) DNS has failed; flush the DNS cache on every computer — 8.8.8.8 is an IP address, so DNS plays no part in this failure.
- d) The computers have duplicate IP addresses; renew every address — Valid addresses and successful gateway pings show no address conflict.
Question 17 — Module 9 (book §9.1)
One laptop out of fifteen in an office cannot reach the internet; the other fourteen devices work normally on the same network. Where is the fault most likely to be?
Correct answer: a) With that laptop, its cable or connection, or its configuration
Why it is right: Asking whether one device or all devices are affected halves the problem. If only one device fails, the fault lies with that device, its cable or its configuration.
Why the other options are wrong:
- b) With the router or modem shared by the office — A shared router or modem fault would affect every device.
- c) With the internet service provider — A provider outage would affect every device.
- d) With the office's DNS provider — A DNS provider fault would also affect every device that uses it.
Question 18 — Module 10 (book §10.5, §13.1)
A user calls to say their screen shows a message demanding payment to unlock their files, and some files on a shared drive have strange new extensions. What should be done?
Correct answer: d) Disconnect the device from the network, do not interact with the message, and report it to IT security immediately
Why it is right: A ransom message is a security incident that demands immediate escalation. Isolate the device to stop spread, do not pay or interact, and report to IT security; serious infections need specialist remediation.
Why the other options are wrong:
- a) Ask the user for their password so you can log in remotely and investigate — Never ask a user for their password, and remote log-in keeps the infected device connected.
- b) Restart the computer to clear the message, then run a quick scan — Restarting and scanning delays escalation and may destroy evidence or let the infection spread.
- c) Pay the demand quickly to limit the damage — The book is explicit: do not pay or interact with the message.
Question 19 — Module 10 (book §10.4, §5.4)
A user's password works on webmail from their phone, but their office laptop rejects it at sign-in. They changed the password yesterday. The laptop's clock is correct. What is the most likely cause?
Correct answer: c) The laptop is still holding saved old credentials
Why it is right: The book lists 'login fails on one device only' as a symptom of saved old credentials or a wrong clock. The clock is correct and the password was changed yesterday, so stale saved credentials are the most likely cause; update them.
Why the other options are wrong:
- a) The account has been permanently disabled — A disabled account would also fail on webmail.
- b) The user has forgotten the new password — The same password works on webmail, so the user knows it.
- d) The keyboard is faulty — A keyboard fault is possible but far less likely than the recent password change; test simple, likely causes first.
Question 20 — Module 11 (book §11.1)
A network printer prints its own test page perfectly, but no computer in the office can print to it. Where is the fault most likely to be?
Correct answer: a) In the computers or the network path to the printer, such as the queue, driver or connection
Why it is right: A test page printed from the printer itself proves the printer's mechanism works. The book's rule: if it prints, the fault is in the computer or network.
Why the other options are wrong:
- b) In the printer's toner or drum — Toner or drum faults would show on the test page as blank, streaked or faded print.
- c) In the printer's paper feed — Paper feed faults would affect the test page too.
- d) In the printer's power supply — The printer is powered and printing.
Question 21 — Module 12 (book §12.1–12.2)
A shared file server fills its disk every few weeks and stops accepting saves. Investigation shows nobody ever set up the archiving of finished projects, because it was never part of the server build checklist. Which action is the root-cause fix?
Correct answer: b) Configure automatic archiving of finished projects and add it to the server build checklist
Why it is right: A root-cause fix acts on the deepest correctable cause so the problem does not return. Configuring archiving and adding it to the build checklist also prevents the fault on future servers.
Why the other options are wrong:
- a) Restart the server whenever saves fail — Restarting is a workaround: it keeps people working but changes nothing.
- c) Delete old files now to free space — Deleting files is a fix for the immediate fault, but the disk will fill again.
- d) Ask staff to save smaller files — Changing user behaviour treats the symptom and ignores the missing process.
Question 22 — Module 12 (book §12.2–12.3)
Students report that a coursework portal is slow. The team suspects several possible contributing factors: an old server, uploads at peak times, a missing caching policy and heat in the server room. Which technique best organises these causes before testing?
Correct answer: c) A fishbone (Ishikawa) diagram, because several factors in different categories may contribute
Why it is right: The fishbone diagram is used when many factors may contribute: causes are grouped under categories such as people, process, technology, network, environment and measurement, then the most likely are tested.
Why the other options are wrong:
- a) The 5 Whys, because it follows a single chain of cause — The 5 Whys suits a single chain of cause, not several parallel factors.
- b) Half-split, because the portal is a chain of components — Half-split locates a single fault along a chain; it does not organise several candidate causes.
- d) Rollback, because the slowness began after a change — No change has been identified as the start of the problem.
Question 23 — Module 13 (book §13.1, §8.6)
While checking a laptop that will not charge, a technician notices the case is bulging and the battery feels hot. What is the correct action?
Correct answer: d) Stop work, switch off at the source if it is safe to do so, and escalate because safety is at risk
Why it is right: A swollen battery is one of the book's safety escalation triggers. Stop, switch off at the source only if it is safe, and escalate.
Why the other options are wrong:
- a) Open the case to inspect the battery more closely — Opening a device with a swollen, hot battery creates a fire and injury risk.
- b) Try a different charger to see whether the battery recovers — Charging a swollen battery adds to the danger.
- c) Press on the case to reseat the battery connector — Pressure on a swollen battery can cause it to fail violently.
Question 24 — Module 13 (book §13.2, Fig 13.1)
An office's internet connection is down. The help desk has power-cycled the modem and router, and the modem's internet light stays red. In the tiered support model, who should now handle the problem?
Correct answer: a) Tier 4: vendor or external, here the internet service provider
Why it is right: Escalate down the tiers when a fault exceeds skill, access or authority. Only the provider can test and reset its own line, and Tier 4 is vendor or external, including the ISP.
Why the other options are wrong:
- b) Tier 0: self-help, using the knowledge base — Self-help cannot reset an external line.
- c) Tier 1: the help desk, by repeating the quick-win checks — The quick wins have already been done; repeating them wastes time.
- d) Tier 3: in-house developers — Developers have no access to the provider's equipment.
Question 25 — Module 14 (book Ch14 Case Study 1)
At 08:30, all fifteen staff in an office report no internet access, though internal file sharing still works, after an overnight power cut. Which single test best proves that the fault lies outside the office network?
Correct answer: c) A laptop receives a valid IP address and can ping the router, but cannot ping 8.8.8.8
Why it is right: A valid address and a successful ping to the router prove the local network works; failure to reach 8.8.8.8 places the fault beyond the router, at the modem or provider. This is the test used in the book's first case study.
Why the other options are wrong:
- a) Restarting every computer in the office — Restarting computers is a quick win, not a test that locates the fault, and every device is affected anyway.
- b) Running nslookup on one computer — nslookup tests name resolution; it cannot separate a local fault from an external one when nothing reaches the internet.
- d) Checking that the printers are switched on — Printers are local devices and say nothing about the internet connection.
Where to revise
Find each question you missed in the table and revisit the module, its checkpoint and the matching Toolkit sheet.
| Module | Questions | Revisit | Toolkit support |
|---|---|---|---|
| 1 | 1 | Module 1 — Introduction to Troubleshooting (§1.1–1.4) | Final Revision Guide (Part I) |
| 2 | 2, 3 | Module 2 — The Troubleshooting Mindset (§2.2–2.5) | Final Revision Guide (Part I) |
| 3 | 4, 5 | Module 3 — The Universal Seven-Step Methodology (§3.1–3.8) | One-Page Checklist and Seven-Step Reference Chart |
| 4 | 6, 7 | Module 4 — Identifying and Defining the Problem (§4.1–4.6) | Problem Investigation Worksheet and 5W1H Question Guide |
| 5 | 8, 9 | Module 5 — Quick-Win Checks (§5.1–5.6) | One-Page Checklist |
| 6 | 10, 11 | Module 6 — Isolation Techniques (§6.1–6.7) | Half-Split Isolation Worksheet |
| 7 | 12, 13 | Module 7 — Essential Diagnostic Tools (§7.1–7.5) | Diagnostic Commands Quick Reference |
| 8 | 14, 15 | Module 8 — Computer and Hardware Troubleshooting (§8.1–8.6) | Final Revision Guide (Part III) |
| 9 | 16, 17 | Module 9 — Network Troubleshooting (§9.1–9.6) | Diagnostic Commands Quick Reference |
| 10 | 18, 19 | Module 10 — Operating System, Software and Accounts (§10.1–10.5) | Final Revision Guide (Part III) |
| 11 | 20 | Module 11 — Printers, Mobile Devices and Peripherals (§11.1–11.5) | Final Revision Guide (Part III) |
| 12 | 21, 22 | Module 12 — Root Cause Analysis and Prevention (§12.1–12.4) | Root Cause Analysis Worksheet |
| 13 | 23, 24 | Module 13 — Escalation, Communication and Documentation (§13.1–13.5) | Escalation Handover Template |
| 14 | 25 | Module 14 — Case Studies (Chapter 14) | Case-Study Exercise Sheets |
Score bands (self-assessment guide)
- 22–25: Strong. You apply the method confidently; move on to the capstones if you have not already.
- 18–21: Pass. Review the explanations for the questions you missed and the modules named above.
- Below 18: Not yet. Work through the modules for the questions you missed, including their checkpoints, then retake the questions after a few days.
Sources
- Dr. Tahseen Al Doori — Troubleshooting Essentials, University Edition (2026), Chapters 1–14 (sections as listed for each question)
