NewAI Content Creation is now live in Early Access
Turning Point Training Instituteby Training Center
Skip to content
0%
Module 11 — Printers, Mobile Devices and PeripheralsLesson 1 of 4
Video lesson

Printers: Diagnosis, Queues and Drivers

BeginnerVideo lesson
10 min readBeginner

Where you are: Module 11 — Printers, Mobile Devices and Peripherals · Lesson 11.1 · Based on Chapter 11 (§11.1) of Dr. Tahseen Al Doori's Troubleshooting Essentials.

What you'll be able to do

  • Work through the book's seven printer checks in the correct order.
  • Use a test page printed from the printer itself to decide whether a fault lies in the printer or in the computer and network.
  • Match five common print symptoms to their likely causes.
  • Clear a stuck print queue and refresh a printer driver safely.

Watch: Printers: Diagnosis, Queues and Drivers

The video follows a single ticket (a user who sends invoices that never print) through the seven printer checks, and shows how one test page cuts the problem in half. As you watch, keep these questions in mind:

  • Which single check tells you whether the printer itself is healthy?
  • Why does the book put "test from another computer" last rather than first?
  • Which symptom points to the driver rather than to the toner?

Why printers feel harder than they are

A printer is a chain of parts. A document starts in an application, passes to the operating system's print queue, is translated by the printer driver (the small program that tells the computer how to talk to a particular printer model), travels over a USB cable, a network cable, Wi-Fi or Bluetooth, and finally reaches the printer, which needs power, paper and ink or toner. A fault anywhere in that chain produces the same complaint: "it won't print".

The key idea of Chapter 11 is to separate the device from the computer. Test the device on its own, then test the computer with another device. Whichever half fails holds the fault. This is the half-split method from Module 6 applied to peripherals.

The seven printer checks

The book gives seven checks. They run from the quickest and simplest to the more involved, in the same spirit as the five quick wins in Module 5.

Display and suppliesConnectionDefault printerClear queue, restartTest pageRe-add, driverAnother computer
  1. Check the printer's display, power and supplies. Read any error on the printer's own screen, and check power, paper, ink or toner and paper jams. The printer is often telling you exactly what is wrong.
  2. Check the connection. Depending on the printer, that means the USB cable, the network cable, the Wi-Fi network or the Bluetooth pairing.
  3. Confirm that the correct printer is selected as the default. Many offices have several printers with similar names. A job sent to the wrong one is not "lost"; it is simply somewhere else.
  4. Clear the print queue, then restart the printer and the computer. A single stuck job can block every job behind it.
  5. Print a test page from the printer itself. If the printer's own test page prints, the printer's engine, paper path and supplies are working, so the fault lies in the computer or the network.
  6. Remove and re-add the printer; update or reinstall the driver. This rebuilds the computer's connection to the printer from scratch.
  7. Test from another computer. If another computer prints normally, the first computer is at fault; if no computer can print, look at the printer, its network connection or the shared path between them.

Step 5 is the turning point. Before it, you are checking the obvious; after it, you know which half of the chain to investigate.

Five symptoms and their likely causes

The book links common symptoms to their likely causes. Learn this table: it lets you form a sensible first theory (Step 2 of the method) within seconds.

SymptomLikely cause
Blank pagesEmpty or incorrectly installed cartridge; protective tape left on
Streaks or faded printLow toner or ink, dirty print head or drum
Jobs stuck in queueSpooler fault, offline printer, connection problem
Garbled charactersIncorrect or corrupt driver
Paper jams repeatedlyWrong paper type, worn rollers, foreign object

Notice the pattern. Physical print-quality problems (blank, streaked, faded, jammed) point to the printer and its supplies. Problems with what is printed (garbled characters) or whether it is printed (stuck jobs) point to the computer side: the queue, the driver or the connection. The spooler is the operating system service that holds print jobs and feeds them to the printer one at a time; if it stops, jobs pile up.

The print queue and drivers

A stuck queue is one of the most common printer tickets. The usual sequence is: open the queue, cancel the stuck jobs, restart the printer and the computer, and print again. If garbled characters appear, or the problem returns after the queue is cleared, remove the printer, add it again and update or reinstall the driver (step 6).

Beyond the book (2026 note): On Windows 11, Microsoft's instructions to open a printer's queue are Start > Settings > Bluetooth & devices > Printers & scanners, select the printer, then Open print queue. Microsoft's guidance for jobs stuck in the queue is to cancel the jobs there first; if that does not clear them, restart the Print Spooler service; then turn the printer off, wait at least 60 seconds, turn it back on and restart the PC. Restarting a Windows service needs administrator rights, so on an organisation's computer that step may belong to IT support. Sources: Microsoft Support, "View a printer's print queue in Windows" and "Fix print job stuck in queue errors in Windows" (links below).

Safety inside the printer

Clearing a jam or changing a cartridge means opening covers. Treat the inside of a printer with the same care as any other equipment.

Safety: Follow the manufacturer's instructions for your model when clearing jams or replacing toner, and open only the covers they tell you to open. Parts inside a laser printer can be very hot after printing. Never open the printer's power supply. If the printer is under warranty or a service contract, or a jam cannot be cleared by following the instructions, stop and escalate (Chapter 13).

Beyond the book (2026 note): As an example of manufacturer guidance, Brother's jam-clearing instructions for one of its laser printers carry a "HOT SURFACE" warning that the machine's internal parts will be extremely hot, and tell the user to leave the machine switched on for 10 minutes so the internal fan can cool them before touching anything. Instructions differ between models, so always use the page for your printer. Source: Brother support, "Paper is Jammed in the Back of the Machine" (link below).

Worked example

(fictional scenario) On Monday at 09:10, Priya in the finance team reports that invoices she sends to the second-floor printer never appear. Her colleagues are printing to the same printer without trouble. Priya received a new laptop last week.

  • Identify. One user, one laptop; colleagues print normally; the printer's display says Ready. The most recent change is the new laptop.
  • Theory. Because others can print, the printer is probably healthy. The likely causes are on Priya's laptop: the wrong default printer, a stuck queue or a driver problem.
  • Test. A test page printed from the printer's control panel comes out cleanly (step 5), which confirms that the printer is fine. On the laptop, the default printer turns out to be a duplicate entry, "Second floor (Copy 1)", left over from setup. Its queue holds six stuck jobs.
  • Plan and implement. Cancel the stuck jobs, remove the duplicate entry and re-add the printer, which installs the current driver.
  • Verify. An invoice prints correctly and Priya confirms that she can print from her accounting application.
  • Document. The ticket records the cause, and a note is added to the laptop setup checklist to remove duplicate printer entries before handover.

Notice how quickly "colleagues print fine" and the test page divided the problem. The fix took minutes because the method did not waste time on the printer.

Try it

Use a printer you are allowed to work with: at home, in a lab, or a shared printer with your support team's agreement. Do not open printer covers for this activity.

  1. Find out how to print a configuration or test page from the printer's own control panel (the printer's manual or manufacturer support page will explain).
  2. Print it, and write down what it tells you (for example its network address or supply levels).
  3. Print a short document from your computer.
  4. Write two sentences: if the test page printed but the computer's document did not, which half of the chain would you investigate, and which of the seven checks would you do next?

Completion criteria: you have a test page (or a note of why the printer has none), a computer print attempt, and two sentences correctly naming the half to investigate and the next check.

Knowledge check

A printer prints its own test page, but no computer in the office can print to it. Where is the fault most likely to be?

Printed pages come out full of random symbols instead of text. What is the most likely cause?

A brand-new cartridge has just been fitted and every page comes out blank. What should you check first?

Which of the seven checks most directly separates printer faults from computer or network faults?

Answers explained

  1. C. The test page proves that the printer, its toner and its paper path work. Since every computer fails, the common factor is the network or the shared print path. The toner, tray and rollers are all part of the printer that just worked.
  2. A. The book links garbled characters to an incorrect or corrupt driver. Low toner and tape cause faded or blank pages, and the wrong paper causes jams, not random symbols.
  3. B. The book links blank pages to an empty or incorrectly installed cartridge or protective tape left on. A new cartridge makes this the obvious first check. Driver, spooler and default-printer faults do not produce blank pages.
  4. D. If the printer's own test page prints, the printer is healthy and the fault is in the computer or the network. The other checks fix specific causes but do not split the chain in half.

Key takeaways

  • Work through the seven printer checks in order, from the printer's display to testing from another computer.
  • A test page printed from the printer itself is the turning point: it divides the problem into the printer half and the computer-and-network half.
  • Print-quality symptoms point to supplies and hardware; stuck jobs and garbled output point to the queue, the connection or the driver.
  • Clear stuck queues and refresh drivers before suspecting the printer, and follow the manufacturer's safety instructions whenever covers are opened.

Sources