NewAI Content Creation is now live in Early Access
Turning Point Training Instituteby Training Center
Skip to content
0%
Module 11 — Printers, Mobile Devices and PeripheralsLesson 3 of 4
Video lesson

Keyboards, Mice, Displays, Projectors and Audio

BeginnerVideo lesson
9 min readBeginner

Where you are: Module 11 — Printers, Mobile Devices and Peripherals · Lesson 11.3 · Based on Chapter 11 (§11.3–11.5) of Dr. Tahseen Al Doori's Troubleshooting Essentials.

What you'll be able to do

  • Diagnose wired and wireless keyboard and mouse faults, including unexpected characters and an erratic pointer.
  • Troubleshoot a display or projector that shows no image, including using Windows+P to choose a display mode.
  • Check audio at all three levels of mute and volume, the selected device and app permissions.
  • Separate a peripheral from the computer by testing each with a known-good partner.

Watch: Keyboards, Mice, Displays, Projectors and Audio

The video opens in a lecture room where a laptop shows nothing on the projector, and then works through input devices, displays and audio. It ends with an online meeting where nobody can hear the speaker. Keep these questions in mind:

  • What is the first thing to check on the display itself, before touching the laptop?
  • Where can sound be muted, apart from the volume key?
  • How do you prove whether a headset or the computer is at fault?

One idea for every peripheral

A peripheral is any device attached to a computer: a keyboard, mouse, monitor, projector, headset or speaker. The book's key idea for this chapter is simple and powerful: separate the device from the computer. Test the device on its own (or on another computer or phone), and test the computer with another device. The half that fails holds the fault. This is substitution and half-splitting from Module 6, applied to one cable or one wireless link.

1

Test the device elsewhere

Plug the keyboard into another computer, or try the headset on another phone. If it fails there too, the device is at fault.

2

Test the computer with another device

Connect a known-good keyboard, monitor or headset. If that works, the original device is at fault; if not, look at the computer.

3

Let the failing half guide you

Whichever half fails holds the fault. Investigate only that half.

Keyboards and mice

The book separates wired and wireless devices and adds two classic symptoms.

SituationChecks from the book
Wired device not workingReseat the cable, try another USB port, test on another computer
Wireless device not workingReplace the batteries, re-pair the device, move the receiver closer
Unexpected characters when typingCheck the keyboard language and layout setting
Erratic pointerClean the sensor and use a suitable surface

The "unexpected characters" case catches many people. If letters appear correctly but some symbols come out as different symbols, the keyboard is almost certainly fine: the operating system is using a different keyboard layout (the mapping between physical keys and characters) from the one printed on the keys. Changing the layout setting fixes it, and it is a good example of Check 4 in Module 5, settings and input.

Displays and projectors

A projector that shows nothing is one of the most common classroom and meeting-room faults. The book gives four checks.

Power and input sourceReseat or replace cableWindows+P display modeResolution, refresh, driver
  1. Check the power and the selected input source on the display. A projector or monitor with several inputs (for example two HDMI ports) shows nothing if it is listening to the wrong one. This check is on the display, not the computer.
  2. Reseat or replace the video cable; try another port or adapter. Adapters fail more often than people expect, and they are easy to substitute.
  3. Use the display shortcut (Windows+P on Windows) to select duplicate or extend. The laptop may be sending its picture only to its own screen.
  4. Check resolution and refresh rate settings; update the graphics driver. A resolution or refresh rate (how many times per second the image is redrawn) that the display does not support can leave the screen blank.

Beyond the book (2026 note): Microsoft's support page on projecting describes the four options offered by the Windows logo key + P: PC screen only (one display only), Duplicate (the same thing on all displays), Extend (the desktop spread across screens, with items movable between them) and Second screen only (everything on the second display only). Source: Microsoft Support, "Screen mirroring and projecting to your PC or wireless display" (link below).

Safety: Never open a monitor or a projector. The book warns that monitors and power supplies can hold dangerous charges even when unplugged. If a display smells of burning, smokes or sparks, switch off at the source if it is safe to do so and escalate.

Audio: the three levels of mute

Sound can be silenced in more places than people realise. The book's first audio check is to look at mute and volume at three levels:

  1. The device — the headset's own mute switch or the speaker's volume knob.
  2. The application — the meeting or media app's own volume and mute buttons.
  3. The operating system — the system volume and its per-app settings.

A signal must pass all three. If any one is muted, nothing is heard, however loud the others are. The book then adds three more checks:

  • Confirm that the correct playback or recording device is selected. A computer with a built-in microphone, a webcam microphone and a headset may be recording from the wrong one.
  • Check application permissions for the microphone and camera. Modern operating systems block apps from using them unless permission is given.
  • Test the headset or speakers on another device. This is the device-versus-computer split again.

Beyond the book (2026 note): On Windows 11, Microsoft's instructions are: choose the playback device under Start > Settings > System > Sound, in the Output section; check the per-device and per-app volume controls in Volume mixer, where a muted control shows an "x"; and allow microphone access under Start > Settings > Privacy & security > Microphone, making sure Microphone access and Let apps access your microphone are on. The recording device is chosen in the Input section of Sound settings. Sources: Microsoft Support, "Fix sound or audio problems in Windows" and "Fix microphone problems" (links below).

Worked example

(fictional scenario) At 14:00, Lina joins an online meeting from her laptop. She can hear everyone, but nobody can hear her. Yesterday she used the same app successfully with a USB headset; today she is using the laptop's built-in microphone because she left the headset at home.

  • Identify. Playback works; recording does not; only in this app; the change is the missing headset.
  • Theory. The app is still set to the headset as its microphone, or the microphone is muted at one of the three levels.
  • Test. Lina is not muted in the app, and the laptop has no hardware mute switch. In the app's audio settings, the selected microphone is the headset, which is not connected.
  • Plan and implement. Select the built-in microphone in the app.
  • Verify. The app's microphone test shows a moving level, and colleagues confirm that they can hear her.
  • Document. A one-line note is added to the team's meeting guide: "If people can't hear you, check which microphone the app is using."

Try it

On your own computer, without changing anything permanently:

  1. Find the volume and mute controls at all three levels: one application, the operating system, and your speakers or headset.
  2. Find where your operating system lists playback and recording devices, and note which ones are selected.
  3. Find where app permissions for the microphone are shown, and note which apps have permission.
  4. If you have a second display or a projector available, find your system's display-mode options (on Windows, press Windows+P) and note the modes offered.

Completion criteria: a short list naming each control's location, the selected playback and recording devices, the apps with microphone permission, and (if available) the display modes offered. Return every setting to how you found it.

Knowledge check

A keyboard types the correct letters, but several symbols come out as different symbols. What is the most likely cause?

A laptop is connected to a projector, but the projector shows nothing. Following the book, what should you check first?

Nobody can hear a user in a meeting app. The headset works on her phone. Which check comes next?

Why does the book recommend testing a headset on another device?

Answers explained

  1. D. Correct letters with wrong symbols points to a layout setting, not to hardware. A broken keyboard or flat battery would affect all keys, and a dirty sensor belongs to a mouse.
  2. A. The book's first display check is the display's own power and input source. Drivers come last, battery health is unrelated, and the inside of a projector is never opened.
  3. C. The headset works elsewhere, so it is not faulty; the computer side is next, starting with device selection and permissions. Reinstalling or opening the laptop is far too drastic.
  4. B. Testing a device on another computer or phone is the device-versus-computer split from the chapter's key idea. It does not update, charge or reset anything.

Key takeaways

  • Separate the device from the computer: test the device elsewhere and test the computer with a known-good device.
  • Keyboards and mice: cables and ports, batteries and pairing, layout settings, and a clean sensor on a suitable surface.
  • Displays: power and input source first, then cables and adapters, then display mode (Windows+P), then resolution, refresh rate and driver.
  • Audio: mute and volume at the device, application and operating-system levels, then device selection, permissions and a test on another device.

Sources