NewAI Content Creation is now live in Early Access
Turning Point Training Instituteby Training Center
Skip to content
0%
Module 8 — Computer and Hardware TroubleshootingLesson 2 of 4
Video lesson

Slow, Freezing and Overheating Systems

BeginnerVideo lesson
9 min readBeginner

Where you are: Module 8 — Computer and Hardware Troubleshooting · Lesson 8.2 · Based on Chapter 8 (§8.3–8.4) of Dr. Tahseen Al Doori's Troubleshooting Essentials.

What you'll be able to do

  • Apply the book's seven-step checklist to a slow or freezing computer.
  • Use a monitoring tool to find the process, resource or condition behind slowness.
  • Recognise the symptoms of overheating and choose safe corrective actions.
  • Decide when overheating needs a qualified technician.

Watch: Slow, Freezing and Overheating Systems

The video works through the book's checklist on a fictional laptop that has become painfully slow, then turns to heat: how to recognise it, what causes it and what you may and may not do about it. Keep these questions in mind:

  • Why does the checklist start with a restart, and what does it mean if the slowness returns?
  • How much free storage does the book recommend, and why?
  • Which overheating fixes are yours, and which belong to a qualified technician?

Slow or freezing systems (§8.3)

"The computer is slow" is one of the most common reports a support team receives, and one of the vaguest. The book turns it into a checklist, ordered from the quickest checks to the more involved:

  1. Restart the computer and note whether the slowness returns.
  2. Check free storage; keep at least 10–15% of the drive free.
  3. Open Task Manager or Activity Monitor and identify processes using high CPU, memory or disk.
  4. Disable unnecessary startup programs.
  5. Install pending updates and run a full malware scan.
  6. Check for overheating: blocked vents, dust build-up, constantly loud fans.
  7. If the drive is a mechanical hard disk, consider its health and an upgrade to a solid-state drive.

Why each step matters:

  • Restart clears temporary memory and stuck processes (Module 5). If slowness returns soon, you have evidence of an ongoing cause, such as a program that gradually consumes memory (a memory leak). A restart that has to be repeated is a workaround, not a fix.
  • Free storage matters because the operating system needs working space for temporary files and updates. A nearly full drive causes slowness, failed saves and crashes.
  • Monitoring turns "slow" into evidence: which resource is exhausted, and which process is responsible (Lesson 7.1).
  • Startup programs load every time the user signs in. Each one adds to start-up time and keeps using resources in the background.
  • Updates and malware: updates fix known performance bugs; malware (malicious software) often consumes resources while hiding. Run scans only with approved security software and within organisational policy; a ransom message means isolate and escalate, not investigate.
  • Heat is, in the book's words, a common cause of slowness, random shutdowns and component failure, so a hot computer can feel exactly like a slow one.
  • Mechanical hard disks have moving parts and are far slower than solid-state drives (SSDs), which store data electronically. A struggling hard disk may also be a failing one (Lesson 8.3).

Beyond the book (2026 note): Microsoft's current Windows guidance also suggests having 10–15% of free space available, noting that the exact need depends on the system. Startup programs can be reviewed under Settings > Apps > Startup or on Task Manager's Startup apps tab, which shows each app's startup impact; switching an app off there stops it launching at sign-in without uninstalling it. Sources: Troubleshooting Windows unexpected restarts and stop code errors · Configure Startup applications in Windows — Microsoft Support

A case from the book: the slow laptop

The book's Case Study 2 shows the checklist in action. A manager's laptop had become very slow over two weeks, especially at start-up, with no new hardware added. The theories were low storage, startup programs or malware. Testing showed storage 97% full, and Task Manager showed disk use at 100%: a cloud-sync tool was downloading a large shared folder. Setting the sync tool to keep files online only freed 80 GB, start-up time fell from four minutes to forty seconds, and online-only sync became part of the standard laptop configuration. Two checklist steps (storage and monitoring) found the cause; the documentation step prevented it on every other laptop.

Overheating (§8.4)

Heat is a common cause of slowness, random shutdowns and component failure. The book lists these symptoms:

  • fans running at full speed;
  • the case hot to the touch;
  • shutdowns under heavy load (for example during video calls, games or large exports).

And these corrective actions:

  • clean dust from vents with compressed air;
  • ensure air can flow freely around the device;
  • avoid using laptops on soft surfaces such as beds, cushions or laps, which block the air intakes;
  • check that the fans spin.

Persistent overheating may need new thermal paste (the compound that carries heat from the processor to its heatsink) or a fan replacement, by a qualified technician. That work means opening the device, and on a laptop under warranty it should go to the manufacturer or an authorised service provider.

Clean vents only with the device shut down and unplugged. Do not poke objects into fans or vents, and do not open a laptop or any device under warranty without authorisation. Never open the power supply. If a device smells of burning, smokes or shows a swollen battery, stop, switch off at the source if it is safe, and escalate.

Linking heat to the method

Overheating often produces an intermittent fault: everything works until the room is warm or the workload is heavy. Use the occurrence log from Module 4. If shutdowns cluster in the afternoon, during video calls, or only when the laptop sits on a sofa, heat is a strong theory. Test it safely: move the laptop to a hard, flat surface in a cooler place, close demanding programs and see whether the fault disappears. One change at a time.

Worked example

(Fictional scenario.) A design student's laptop freezes for several seconds while she edits video and has twice switched itself off.

StepCheckFinding
1RestartFine for an hour, then freezing returns
2Free storage41% free: not the cause
3Activity MonitorCPU near 100% during exports, as expected for video editing
4–5Startup items, updates, scanNothing unusual
6HeatFans loud constantly; laptop used on a bed; vents furred with dust

Theory: overheating under heavy load. Test: the student works at a desk with the vents clear; freezing becomes rare but not gone. Plan and implement: with the laptop shut down and unplugged, the vents are cleaned with compressed air. Verify: a full export completes with no freezes or shutdowns. Document: the cause and fix are recorded, with advice to keep the laptop on hard surfaces. Had shutdowns continued, the next step would be a qualified technician, not opening the laptop herself.

Try it

Use your own computer; nothing below changes or opens anything.

  1. Record free storage as a percentage. Is it above the book's 10–15%?
  2. Open Task Manager, Activity Monitor or top. Record the top three processes by CPU and by memory while you work normally.
  3. List your startup programs and mark any you do not need at sign-in (do not disable anything you do not recognise).
  4. Feel the air from the vents during a demanding task, and note fan noise and where the device usually sits.

Completion criteria: a one-page health note with storage percentage, top processes, a startup list with recommendations, and a heat observation, ending with one sentence naming the most likely cause if your computer were to become slow.

Knowledge check

A laptop is fast after a restart but slow again within an hour, every day. What does this suggest?

According to the book, how much of the drive should be kept free?

Which is a symptom of overheating listed in the book?

Overheating continues after vents have been cleaned and airflow improved. What is the appropriate next step?

Answers explained — 1: slowness that returns soon after a restart means the restart treated a symptom; the cause persists, while power and display faults would not follow this pattern. 2: the book's figure is 10–15%; 1% is far too little and 50% is not what the book says. 3: shutdowns under load are a heat symptom; the other options belong to network, boot and printer faults. 4: persistent overheating needs a qualified technician; removing the fan, blocking airflow or opening a power supply is unsafe.

Key takeaways

  • Slow or freezing: restart, check storage, monitor processes, trim startup items, update and scan, check heat, consider the drive.
  • If a restart has to be repeated, it is a workaround: keep looking for the cause.
  • Overheating shows as loud fans, a hot case and shutdowns under load; clean vents, keep airflow clear and avoid soft surfaces.
  • Thermal paste and fan replacement are for a qualified technician; respect the warranty.

Sources